How to Update or Upgrade or Downgrade the Skyworth 4K Android Operating System from 7.0.0 to 8.0.0 and newer version!
On this post, I will share to you on how to update your old Android Skyworth TV into a newer version for the following Skyworth Android TV.
Installing TV software updates ensures that your TV operating system continues to run safely and efficiently. Keep in mind that many app exploits look for an outdated software with unpatched security flaws.
A vulnerable Android TV app might risk your personal data and privacy that may lead to financial loss and even a much great damaged.
If update is available "Download and Install it".
AndroidTV Firmware Upgrade process via USB Flash Drive:
Link to Skyworth 4K Android Version 7.0.0 Operating System Available for download.
Please note*** PQ/PANEL Data upgrade process is not necessary when the above process have successful.
On your original skyworth remote press the key of 'source' to enter source menu and press the key of'3''1''9''5' continuously to enter the factory general settings menu, you will see the UI as follows:
Go to and choose 'General settings' you will enter the UI as follows:
Choose 'Overseas Settings' you will enter the UI as follows:choose 'Update PQ; and 'Upate Panel' to upate PQ and Panel(Optional). When you see 'Success' on the TV means update success.
After you update PQ and Panel successfully. Please remove the AC cord and restart TV.
Please refer to step 2 to enter the factory menu and choose 'General settings' again.
Please choose 'Restore Default Menus' and press 'ok'.
Please refer to step 2 to enter the factory menu and choose 'General settings' again.
Please choose 'Factory Reset' and Press OK,then TV will reset.
Skyworth 4K Android Version 7.0.0 is available to download using the following link below. Take note this software is coming directly from the Skyworth Head Quarter in China.
Even the instructions on how to update the TV is also from them. I just translate it to English to understand by none Chinese speakers.
This software is also a solution for the following Skyworth Android TV problems;
Android 7.0.1 Download Link:
Android 8.0.0 Download Link:
Please scroll down for the complete guide and upgrade instructions.
List of Skyworth G2 Series
- Skyworth 58G2 Android Version 6.0.1 to Android Version 7.0.0 or Version 8.0.0
- Skyworth 55G2 Android Version 6.0.1 to Android Version 7.0.0 or Version 8.0.0
- Skyworth 50G2 Android Version 6.0.1 to Android Version 7.0.0 or Version 8.0.0
List of Skyworth G2 Series
- Skyworth 55G6 Android Version 6.0.1 to Android Version 7.0.0 or Version 8.0.0
- Skyworth 49G6 Android Version 6.0.1 to Android Version 7.0.0 or Version 8.0.0
Why would I need to update my Android LED TV Software?
Software update is a must do because, it contain bug fixes for a more improve performance, stability and security of the applications that run on your Android LED TV.Installing TV software updates ensures that your TV operating system continues to run safely and efficiently. Keep in mind that many app exploits look for an outdated software with unpatched security flaws.
A vulnerable Android TV app might risk your personal data and privacy that may lead to financial loss and even a much great damaged.
Do Exploits and Malware or Virus infect Android TV Operating System?
Yes, in-fact I myself have test to write and execute an exploit to my own 4K Android TV. And as expected I got my personal data and I can remotely control the Android TV. Here is how to attack the Andriod TV;To exploit the kernel of Android TV use "CVE-2013-7263 & CVE-2013-6282" to gain privilege to the root the Android LED TV.Now who told you that TV's is not vulnerable to exploits and malware or viruses. Therefore, an on time update is really important if you want to be safe.
Then use the "Leveraging the NDK and JNI" to create an application that deliver the payload to the target Android LED TV. This payload will bring a native code application that will root and SELinux Android 6.0 device.
Use static analysis to perform a "local" attack on a target Android application to obtain sensitive information from another Android app installed on the device.
Leveraging BakSmali to decompile, and dynamic runtime analysis of native code, we will peer "into" the process space of a running Android app to see what data it is transferring in an otherwise un-man-in-the-middle-able encrypted communication with a server.
Use Chrome WebView to gain a remote code execution to the Android TV. Once execute, you need to debug an app and heapspray into system_server in preparation for an actual exploit.
Using a logic analyzer reverse engineer pinouts of Android LED TV UART interfaces.
Now will download firmware of the LED TV DIRECTLY from the manufacturer's website, unpack it, disassemble it, find the requisite parts (bootloader, filesystem, etc.), decompile the APKs, and go on a guided tour of the native code and Dalvik code that contain many interesting tidbits.
Now you "0wn" an Android device by leveraging JTAG interface via a LED TV VGA port or service port!
How to Update my Android LED TV?
There are two easy steps to Update the Android TV. First, online update. And Second, USB Update.Helpful Illustration on how to Update Skyworth Android LED TV Online:
- Connect the Android LED TV to the internet
- Go to Settings.
- Go to About.
- Go to System Update.
- Check for Update.
AndroidTV Firmware Upgrade process via USB Flash Drive:
4K Skyworth Android 7.0.0 Software:
Link to Skyworth 4K Android Version 7.0.0 Operating System Available for download.4K Skyworth Android 8.0.0 Software:
Link to Skyworth 4K Android Version 8.0.0 Operating System available for download.11 Steps to Upgrade 4K Skyworth Android Version 6.0.1 to Version 7.0.0 to Version 8.0.0 TV:
- Format the USB to FAT32;
- Copy the file named"upgrade_loader_common-xxxx.pkg"(Around 600MB-800MB)into the root of the USB flash drive.
- Unplug the Skyworth 4K Android TV from the power source.
- Insert the USB Flash Drive that contain the software to USB 2.0 Port at the back of Skyworth Android 4K TV.
- Turn on the Android TV using the TV original remote control.
- The upgrade start, TV boot up and logo showing stack on the screen for a while during the upgrade, It will take around 5 minutes.
- Then the Android TV will automatically restarts, and restart again after an around 5 minutes.
- Then it will come to the TV setting.
- Press "source 3 1 9 5" to enter into the factory menu, and check the software version.
- Select General Setting->Out Factory Reset function.
- Finish.(To avoid the Android TV to upgrade again, better remove the USB or delete the software in the USB)
Please note*** PQ/PANEL Data upgrade process is not necessary when the above process have successful.
PQ/PANEL Data upgrade process
Copy the files in an empty USB Flash Disk and insert the USB Flash disk into the USB2.0 on the TV.On your original skyworth remote press the key of 'source' to enter source menu and press the key of'3''1''9''5' continuously to enter the factory general settings menu, you will see the UI as follows:
Choose 'Overseas Settings' you will enter the UI as follows:choose 'Update PQ; and 'Upate Panel' to upate PQ and Panel(Optional). When you see 'Success' on the TV means update success.
Please refer to step 2 to enter the factory menu and choose 'General settings' again.
Please choose 'Restore Default Menus' and press 'ok'.
Please choose 'Factory Reset' and Press OK,then TV will reset.
Even the instructions on how to update the TV is also from them. I just translate it to English to understand by none Chinese speakers.
4K Skyworth Android 7.0.0 Software Download:
Skyworth 4K Android Version 7.0.0 Operating System Available for download.4K Skyworth Android 8.0.0 Software Download:
Skyworth 4K Android Version 8.0.0 Operating System available for download.This software is also a solution for the following Skyworth Android TV problems;
- Hang on Skyworth Logo
- Keep on loading
- Auto on and Auto off
- Can't connect to WiFi
- Can't access the Android TV Home Page
- Distorted Sound 55G6
I have skyworth 55G6 i am on android 6.0 and trying to update to 8.0 or 7.0 but there is no update on the system settings, so i tried the process using usb, but update trough usb wont trigger after power on the tv using the original remote.
ReplyDeleteI will check on that.
DeleteI find the solution to upgrade from 6.0 or 7.0 android to android 8.0. First you dowload android 8.0 on your pc, than you rename the file you downloaded to upgrade_loader_common.pkg than save it. insert the usb in port 2 on your 55G6 tv is what i have, pull out the plug and put it buck switch on tv and just wait 5 minutes it will up date to android 8.0.
DeleteHi aiden,
DeleteI have a skyworth 55g6a11t, if I follow the guide you provided can easily update to andriod 8.0? What if failed, will my tv turn into brick?
Hi sir cloudspyder! Same prob here, we cant upgrade or update thru system settings and usb. Hope you could help us. Thanks
ReplyDeleteSkyworth 55G6
DeleteBonjour
ReplyDeleteJ'ai un problème avec la couleur jaune sur mon tv g6
(Probleme :La couleur jaune vers l'orange).
Merci de votre aide
essaye de régler le white balance dans le menu expert
DeleteHi, cannot enter the factory menu by pressing "source" then 3195 with remote, could you be more specific on how to press those buttons source and 3195 at the same time ? What do you mean by continuously ? Thanks in advance.
ReplyDeleteenter source then go to hdmi then press 3195 and you will directed to the expert menu
DeleteThanks but still doesn't work. I press source then i have all sources displayed (i stay on hdmi 1) then i press 3 then 1 then 9 then 5 and nothing happens. I have a 55G6 with cocoa os. Thanks in advance.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteBJR
ReplyDeleteI have tv skyworth g6 43 "the sound does not work dahua camera plug on xvr 7108e.4kl.x but on d other TV the sound well and when I plug my ps4 pro on the TV g6 the sound well, c ,what is the solution
i have installed android 8.0.0 on 55g2, analog channels no sound and netflix is not working error "Sorry we could not reach the Netflix service. Please check Network settings to connect to an available network and use Netflix (-100)"..
ReplyDeleteI have same problem. I switched to this firmware from globe_ap. Very upsetting.
Deletebuenas , necesito la actualizacion del sw49s6sug , el mismo queda cargando logo mucho tiempo , luego pone actualizando android y hace aproximadamente 55 actualizaciones y vuelve a lo mismo , algun archivo para ese modelo para desbloquear .gracias.
ReplyDeletegracias pude solucionarlo actualice a version 7 y anduvo
Deletehola hernanyer me podrías dar información me sucede lo mismo carga las aplicaciones y se reinicia
Deletesi puedes escribirme a maticarrion9@gmail.com te lo agradezco
Deletemise a jour pour E790S
ReplyDeleteI have a G6 55 android 7.0 upgrade successfully android 8.0 can upgrade
ReplyDeleteWHICH FILE YOU APLOAD FOR 55G2. IS ANY FILES FROM THE LINKS YOU APLOAD GOOD FOR 55G2
ReplyDeleteThe one from the link thy provided
Deleteis the G6 firmware compatible to the G2 tv?
DeleteHi guys, there is a new firmware to Oreo G6? When I install this firmware (Oreo for G6) everything works except Netflix, there's a fix for it or a new firmware? Thanks
ReplyDeleteThe link to firmware Oreo G6
DeleteThere is only 55G6 firmware for android 8.0, can we use this for 55G2?
DeletePlz my brother give me pinout emmc for 43u5 or diagram
ReplyDeleteMy skyworth g6's home button mic button and Chromecast won't work after the upgrade
ReplyDeleteDoes any of you have an iea on to how to upgrade U5 series to the latest versions.
ReplyDeleteHola solucione el problema de un tv smart SKYWORTH SW55S6SUG que me salia un cartel al iniciar el smart "android se está iniciando optimizando aplicación 1 de 65" luego que carga todo se reinicia y vuelve a cargar y reinicia y nunca termina el proceso de optimización..
ReplyDeleteluego de descargar .. Sistema operativo Skyworth 4K Android versión 7.0.0 que es un archivo apk llamado upgrade_loader_common
y realizar los los pasos 1 al 8
no fue necesario restablecer modo de fabrica porque el TV arranco normalmente.
Gracias por el aporte ya que en las paginas oficiales de SKYWORTH no tienen soporte técnico ni para descargar el firmware. Es un buen tv pero lo negativo es que no tiene soporte técnico en america latina.
Espero que les ayude con mi comentario. Saludos!
hola me podrias ayudar por favor? tengo el mismo tv y no logro que inicie la actualizacion. seria tan amable de ayudarme a como iniciar la actualizacion ya que mi tv hace el mismo problema que hacia el suyo
DeleteHOLA XRT .... Y EL ARCHIVO 7.0.0 upgrade_loader_common ..... tenes que descargar... y luego de descargarlo pasalo a un pendrive formateado a FAT32 .. ese pendrive tenes que ponerlo en el televisor apagado, en el puerto usb, luego le das encendido con el control remoto.. esperas que aparezca el logo.. tene paciencia no te desesperes,.. luego deja que se realize la carga demora al rededor de 8 o 10 minutos.. luego se reinicia.. cuando se está reiniciando saca el pendrive para que no arranque de nuevo la carga y vuelva todo de nuevo.. por eso saca el pendrive cuando se reinicia... luego te pedirá que configure el idioma y conexión y otras cosa y arrancará normalmente. ojala tengas suerte.. saludos.
DeleteFormatee el USB a FAT32;
DeleteCopie el archivo llamado "upgrade_loader_common-xxxx.pkg" (Alrededor de 600MB-800MB) en la raíz de la unidad flash USB.
Desenchufe el Skyworth 4K Android TV de la fuente de alimentación.
Inserte la unidad flash USB que contiene el software en el puerto USB 2.0 en la parte posterior de Skyworth Android 4K TV.
Encienda el Android TV usando el control remoto original del televisor.
El inicio de la actualización, el arranque del televisor y el logotipo que muestra la pila en la pantalla durante un tiempo durante la actualización, tomará alrededor de 5 minutos.
Luego, el Android TV se reiniciará automáticamente y se reiniciará nuevamente después de unos 5 minutos.
Luego vendrá a la configuración de TV.
Hola necesito ayuda, mi TV skyworth sw49s6sug al prender ser queda en el logo y no sale de ahí, podrían decirme que hacer por favor ! ya probé lo de descargar lo de est página y sigue sin funcionar! Por favor ayudaaa!
ReplyDeleteHola! Lo pudise solucionar? Yo estoy igual...
DeleteHola lograron solucionarlo?? Yo tengo un 65UB7500 y no puedo solucionar actualizando :(
DeleteHello superuser.. i would like to ask for help. Model 50E3300 is stuck on the skyworth logo. I am a teacher for consumer electronics and there's one problem i really can't solve. Tried to download all the possible os or firmware. I followed the all the step. Except to the remote, it won't start with the remote.
ReplyDeleteHow to change video System to PAL B/G ?
ReplyDeleteHola . Se puede bajar de Android 8 a Android 7 ?
ReplyDeleteI see that Android TV 10.0 was released in Dec-2019. Any timing for when Skyworth will release the update so we can upgrade?
ReplyDeleteHello
ReplyDeleteI have a problem with my tv telefunken g2 58 it no longer starts and hangs on the logo and restarts so I have no access to anything
From forums how to update the TV with firmware on usb and nothing works
So can you tell me how and what firmware I need to use to fix this outage
Model
TV 58 TLF G2 UHD smart android 1950071M00036
Bought on May 3, 2020 from Tunisia
No warranty due to pandemic covid 19 bought from parallel market without warranty
Note I found not about Telefunken
All the sites say it's a SKYWORTH G2
tunisie ya tunisie ehe hehe he
DeleteIrwan buenas tardes tuvo alguna solución?
ReplyDeleteTengo una 58G2 tengo el error de Netflix-100 y no se como solucionarlo, por favor alguien me puede ayudar?
ReplyDeleteHI! The Tv doesn´t load the OS (Android) and its stucks on Skyworth logo. Some solution? Thanks
ReplyDeleteEverybody is complaining but no solution here.. Hey Skyworth Expert technician!! Where are you? Same problem here doesnt load OS keep optimising apps
ReplyDeleteall your instructions were followed.
ReplyDeleteIs this working in 49g6 model? I don't have a Out Factory reset function.
ReplyDeletehello ,
ReplyDeleteI have a problem when I upgrade to version 7 , it stops at erasing and nthing happens after that . is there a solution to that please
thank you
This comment has been removed by the author.
ReplyDeleteاريد عمل updated 50U5A11T
ReplyDeletei have one tv 58g3 out with stand by please firmware and procedure
ReplyDeleteI find the solution to upgrade from 6.0 or 7.0 android to android 8.0. First you dowload android 8.0 on your pc, than you rename the file you downloaded to upgrade_loader_common.pkg than save it. insert the usb in port 2 on your 55G6 tv is what i have, pull out the plug and put it buck switch on tv and just wait 5 minutes it will up date to android 8.0.
ReplyDeleteDear
ReplyDeleteplease i need PQ file for 55G3
my original main board is defect i change it by one from 58G3
I have picture problem 2 pictures side by side
please i need PQ file to solve the problem
thanks
please ho have the solution
Deletepress Menu on remote, then enter 0000. There is a factory video setting, you find there mirroring mode and other. May be you help this
Delete
ReplyDeleteI have a problem with the 49G6 TV. the frimware pass
optimistaion app
to restart
to restart
ارجوك أريد تحديث تلفزيون اريس L50D2400
ReplyDeletePlease heeeeeelp
ReplyDeleteI have skyworth 55Q4
I need upgrade file.pkg
My tv does'nt work
Q3=Q36=Q4 https://drive.google.com/drive/folders/1aHblXe4gfh8ja9TyReY64LrONvcLmMHl
DeleteThanks for response but does'nt work
Deletei have skyworth 65q3c
ReplyDeleteand i need upgrage file.pkg
it would be nice if the file is android 9 :(
My Skyworth 65G6A11T only struck out skyworth logo then hang, please I need a link to download the software and upgrade it thanks
ReplyDeleteit's not working for me on my G2 ..why? I do as you instructed and nothing happens
ReplyDeleteHay .Skyworth TV G3A/G50 ?!😤😤🤯
ReplyDeleteHi admin, 55g611t can do the flashing ?
ReplyDeletelwant to update SKyworth TV 55G6
ReplyDeletelwant to update SKyworth TV 55U5
ReplyDeleteHi i wante update of tv skyworth 55g3
ReplyDeleteI want to update skyworth tv 43U5
ReplyDeleteSuch a Nice post. Thanks for Awesome tips Keep it up
ReplyDelete4ksoftware-4k-downloader-crack
buenas necesito los datos de memoria emmc para poder grabar, cuento con el programador rt809h, si podrían ser tan amables de pasarlo ya que este televisor skyworth modelo sw55s6sug es muy propenso a fallar en el inicio.
ReplyDeleteSo nice I am enjoying for that post as for u latest version of this Security tool Available
ReplyDelete4ksoftware-4k-downloader-crack
Hi, Can anyone help me to update 50U5A11T android TV
ReplyDeleteI have Metz 55G2A51B and i need android 8.0 firmware=upgrade_loader_common.pkg, please help me. I am stuck at
ReplyDelete-erasing-
I like your all post. You have done really good work. Thank you for the information you provide, it helped me a lot. I hope to have many more entries or so from you.
ReplyDeleteVery interesting blog.
softcrack.org
xpress-vpn-crack
Update for 43e700a
ReplyDeleteIt's not compatible with apps 😨😰
how to download the file? cant access the google drive
ReplyDeleteplease help me for my Skyworth 58 G2 I want to restore the original firmware 6.0.0 or 7.0.1 because I updated it to 8.0.0 and now so laggy and some apps are freezing ...I had already reset it but still laggy ..thank you ..jope you can help me ..
ReplyDeleteHi all!
ReplyDeleteI`m have skyworth 58G2A. After upgrade, the image became striped, split in half and swapped places. I think what should be done PQ/PANEL Data upgrade process. Tell me where to get the files for updating PQ/PANEL Data.
This site provides a lot of important information about the maintenance of gas furnaces تصليح افران
ReplyDeletebuenas tengon problemas con mi SKYWORTH 43UB7500 cuando la enciendo la pantalla queda en gris me gustaria saber si me pueden ayudar a conseguir el filware compatible con la placa, de antemano muchas gracias
ReplyDeleteCoocaa 32s7g stock firmware please
ReplyDelete