Coocaa 32S3M Auto Green and Standby Problem Only: Problem Solved by Software Update


Official Store Link
Skyworth Philippines Official Online Store Lazada Enjoy dazzling savings this 2.2 Chinese New Year Sale on Lazada! πŸŽ‰ Get exclusive deals on Skyworth Eyecare TVs at unbeatable prices! Shop now.πŸ“ΊπŸ›’ Most of our merchandise will have up to 60% Off discount.



The defect symptoms of Coocaa 32S3M are as follows; when the TV plugin to the power source, it's light indicator turns red then green again after a while it will going back into red.

The issue (Auto Green and Standby Problem Only) is cause by a deleted or corrupted program on your TV eMMC components. And all of this is due to a faulty antenna that cause overheating when in use. Therefore, an installation of fresh Coocaa 32S3M software and firmware updates will solved the problem.

So in this post I will provide the software and guide you on how to install a fresh software and firmware to you Coocaa 32S3M easy smart TV.

Step by Step Guide on how to repair Coocaa 32S3M using a  Fresh Software

1. Download the Coocaa 32S3M software using the follwoign link: Coocaa 32S3M Easy Smart TV Software

2. Extract the "Coocaa 32S3M Software.zip" . It contains the following;

  1. allupgrade_3563i_sos.bin or https://drive.google.com/file/d/1jeJIjNp_AFWkEo2zuwcqbgKLZIDnqUtJ/view?usp=sharing

2. Move the following extracted software to USB Flash drive root directory.

  •          allupgrade_3563i_sos.bin

3. Insert the USB Flash Drive containing the software into TV USB Port.

4. Cut the power / unplug the TV from power source for at-least 10 seconds.

5. Restore the power / plug the TV from power source. (Please don't do anything.)

6. Wait for at least 5 minutes, if the light indicator blinking it means the installation progresses.

7. After 5 minutes, the light indicator still blinking, Cut the power / unplug the TV from power source for at-least 10 seconds.

8. Remove or take out the USB flash drive.

9. Restore the power / plug the TV from power source. (If the update is successful, it will automatically boot up.)

10. Setup the TV.

***Updated Jan. 31, 2024



Comments