How to update Skyworth 55E2000 Android LED TV?(Downloadable Sofware Inside)

This is a complete tutorial on how to Update Skyworth 55E2000 Android LED TV Software and Firmware into newer version with picture and video. Download link below.

Also, below of this post include the step by step video on how to update Skyworth 55E2000 Android LED TV.

1. Download Skyworth 55E2000 Software.(https://drive.google.com/open?id=1gWz0WgAmibR811whsAYxW4t1z7IxaEIQ)

2. Open download location. (Usually inside "Download Folder")

3. Transfer the filename "install" to USB's root directory.

4. Insert the Flash Disk Drive on USB Port.



. Insert the Flash Disk Drive on USB Port


After we obtain the software, move it inside USB flash disk drive root file. Insert the flash disk drive to Skyworth 55E2000 USB port. Please refer to above image.



5. Enter the Factory Setting

To enter “Factory Settings”, you need to have at least the original Skyworth remote control as minimum requirements. On your remote press “Source” button then follow by numeric keys “3”, “1”, “9”, “5” straight forward.

6. Locate “Software Update (USB)”
Using your original Skyworth remote control navigation keys, up arrow or down arrow locate and select “Software Update” then press “OK”. Please refer to above image.

7. Continue “Software Update (USB)”
A pop up message box will appear and say “This will erase all data and TV will reboot to update. Are you sure to continue?” Please refer to above image.

8. Press “Arrow Right Navigation Key”
To continue, on your remote navigation keys, press arrow right key. Please refer to above image. ***It works to all Skyworth Remote!

9. Skyworth 55E2000 Will Reboot
By pressing the right arrow navigation key on your remote means that you are “green” to initiate the software and firmware update. At this moment, your Skyworth 55E2000 will restart on it’s own for a few seconds. Please refer to above image.

10. Please do not turn off the power! 
A few seconds later, perhaps less than a minute, a progress bar appears and the electronic message bulletin box saying “Please do not turn off the power!” Therefore, do not turn it off else you will ruin the whole unit.

11. Install BOOTCODE
Then you will prompt with another electronic message box “Install BOOTCODE”. This will take another few seconds. Please refer to image above.

12. Install LINUX
Then you will again prompt with another electronic message box “Install LINUX”. This will take another few seconds. Please refer to above image.

13. Install VIDEO_FW
Then you will again prompt with another electronic message box “Install VIDEO_FW”. This will last for another few seconds. Please refer to above image.

14. Install OTHER_PARTITION1
Then you will again prompt with another electronic message box “Install OTHER_PARTITION1”. This will last for minute or few more seconds. Please refer to above image.

15. Install Completed!
Then you will finally prompted with another electronic message box “Install Completed!”. This means the update is successful. Please refer to above image.

16. Reboot!
A few second after electronic message box “Install Completed! appeared, the Skyworth 55E2000 will automatically restart. Please refer to image above.

17. Initial Setup!
Finally, it’s almost done! Now setup your Skyworth 55E2000 with new and updated software running on it.

18. Hello World!
Alas! You can now able to enjoy the rest of days with your super beautiful Skyworth 55E2000!

Video on how to update Skyworth 55E2000 Android LED TV.

Comments

Post a Comment

Popular posts from this blog

How to Install a latest YouTube version on your Old Skyworth Android Smart TV (Download Link Included to Smart YouTube TV)

How to update your skyworth TV Software

How to CONNECT your phone to the TV?