How to update Skyworth 40E2000 and 40E2000D Android LED TV?

This is How to Update Skyworth 40E2000  or 40E2000D Android LED TV Software and Firmware into newer version with picture and video.

Also, below of this post include the step by step video on how to update Skyworth 40E2000  or 40E2000DAndroid LED TV.


2. Open download location.

3. Transfer the filename "install" to USB's root directory

4. Insert the Flash Disk Drive on USB Port


After we obtain the software, move it inside USB flash disk drive root file. Insert the flash disk drive to Skyworth 40E2000 or 40E2000D USB port. Please refer to above image.



5. Enter the Factory Setting

To enter “Factory Settings”, you need to have at least the original Skyworth remote control as minimum requirements. On your remote press “Source” button then follow by numeric keys “3”, “1”, “9”, “5” straight forward.

6. Locate “Software Update (USB)”
Using your original Skyworth remote control navigation keys, up arrow or down arrow locate and select “Software Update” then press “OK”. Please refer to above image.

7. Continue “Software Update (USB)”
A pop up message box will appear and say “This will erase all data and TV will reboot to update. Are you sure to continue?” Please refer to above image.

8. Press “Arrow Right Navigation Key”
To continue, on your remote navigation keys, press arrow right key. Please refer to above image. ***It works to all Skyworth Remote!

9. Skyworth 40E2000 Will Reboot
By pressing the right arrow navigation key on your remote means that you are “green” to initiate the software and firmware update. At this moment, your Skyworth 40E2000 will restart on it’s own for a few seconds. Please refer to above image.

10. Please do not turn off the power! 
A few seconds later, perhaps less than a minute, a progress bar appears and the electronic message bulletin box saying “Please do not turn off the power!” Therefore, do not turn it off else you will ruin the whole unit.

11. Install BOOTCODE
Then you will prompt with another electronic message box “Install BOOTCODE”. This will take another few seconds. Please refer to image above.

12. Install LINUX
Then you will again prompt with another electronic message box “Install LINUX”. This will take another few seconds. Please refer to above image.

13. Install VIDEO_FW
Then you will again prompt with another electronic message box “Install VIDEO_FW”. This will last for another few seconds. Please refer to above image.

14. Install OTHER_PARTITION1
Then you will again prompt with another electronic message box “Install OTHER_PARTITION1”. This will last for minute or few more seconds. Please refer to above image.

15. Install Completed!
Then you will finally prompted with another electronic message box “Install Completed!”. This means the update is successful. Please refer to above image.

16. Reboot!
A few second after electronic message box “Install Completed! appeared, the Skyworth 40E2000 will automatically restart. Please refer to image above.

17. Initial Setup!
Finally, it’s almost done! Now setup your Skyworth 40E2000 with new and updated software running on it.

18. Hello World!
Alas! You can now able to enjoy the rest of days with your super beautiful Skyworth 40E2000!


Video on how to update Skyworth 40E2000 Android LED TV.

Comments

  1. i have skyworth smart tv 43e2000d. after following the above instruction and completing the update process, why does the color of my tv becomes disrupted? pls help.

    ReplyDelete
    Replies
    1. Me too, what happened to my tv? My mother will definitely kill me if she sees this. HEEEEEELLLLLPPPP!!!!

      Delete
    2. what happen? pleaseee let me know, same issue with our tv

      Delete
  2. I want to know what changes is in this update? Is there any improvements?

    ReplyDelete
  3. nasira TV ko d na siya nag open >< please help nag power siya pero wala na black screen nalang siya parang nabura ata lahat ng laman ><

    ReplyDelete
  4. Hello there,

    I updated our Skyworth Android 4.4.2, Model rtc298x_tv001 to

    "Skyworth 40E2000 Software.(install.img)

    downloaded from

    https://www.skyworthphilippines.com/2019/09/how-to-update-skyworth-40e2000-android.html

    saved in USB. I've followed the instructions from YouTube "How to Software and Firmware Update the Skyworth 32E2000 Android Digital TV"(https://www.youtube.com/watch?v=Fsx95Umkd24)

    Now, after the update, the TV is stuck to standby mode, with RED light on and black screen. Tried to unplugged and plugged for few minutes, but nothing has changed. Please kindly assist.

    Thank you very much.
    Once the

    ReplyDelete
  5. I come from Thailand. My TV is SKYWORTH 40E510. Can i load this Firmware?

    My E-Mail sookaphimai@gmail.com

    ReplyDelete
  6. I want to update SKYWORTH 40E510S

    ReplyDelete
  7. i want update skyworth 40e200s

    ReplyDelete
  8. i want update skyworth 40e200a

    ReplyDelete
  9. Can we install netflix in model 40E2000D skyworth?. ASAP pls.🙂

    ReplyDelete
  10. Can we install netflix in model 40E2000D? Thanks for immediate help

    ReplyDelete
  11. Help Is it possible to install netflix in model 40E2000D? 🙂

    ReplyDelete

Post a Comment

Popular posts from this blog

How to connect your Smartphone to Skyworth TV or Coocaa TV? (Viewing phone screen to Android, Smart, Basic TV)

How to update your skyworth TV Software

How to Update Coocaa 50S3N and Add Application?

How to CONNECT your phone to the TV?

How to Connect Skyworth LED TV and Coocaa LED TV with Digital Audio Output to your existing Analog Speaker?

How to Hard reset Skyworth Smart TV?

How to Connect your Skyworth TV to Internet (Wired, Wireless, ADSL Dial-up Complete guide with Illustration)

How to Update or Upgrade or Downgrade the Skyworth 4K Android Operating System from 7.0.0 to 8.0.0 and newer version!

Skyworth Complete Manual Download Link

Connecting your Desktop Computer or Laptop to your TV (Skyworth G2 Series)